KNL series 21m 25m 27m 30m 33m 35m 37m small concrete pump truck is the refined product among the middle and short arm pump truck, after HBT trailer concrete pump, HBC truck-mounted concrete pump, HGY hydraulic concrete placing boom, and it is the high efficient concrete conveying equipment integrating driving, pumping, placing.
The boom covers high reliability, economy, safety, durability, owning reasonable matching of Chassis, power, electric control and hydraulic pump system.
Besides, it has flexible telescopic boom, less space occupation of the leg, convenient moving vehicle, flexible and security.
With the special chassis for the development of rural market and the 2.3 meters width, it can easily adjust to and pass through the narrow and sludge rural roads. Using flexible four arm design, fabric ranges 20% higher than three-arm. At the same time it also applies the unilateral support technology in order to easily perform in a narrow construction site.
● The construction is especially for the new rural middle-low levels.
● The manufacture of short arm frame designed for high-speed rail construction.
● The design of national IV emission standard for energy conservation, and environmental protection
● Hydraulic automatic reversing of pumping system is for simple maintenance.
● 18-37 meters arms can move up and down, in accordance with high-speed rail laws.
● X-legs is designed to lead more safe and stable operation.
● Extremely high performance price ratio and use reliability help the party make profits.
The main characteristics of the KNL series small concrete pump boom:
Chassis and power system: Using truck chassis of Chinese HOWO, FAW, Beiqi Foton, Dongfeng, featuring strong carrying ability, good dynamic performance and low fuel consumption; you can choose the installation of power alone or the chassis power, the Separate power of independent research and development possesses the features of fuel economy, reduce energy consumption, easy maintenance.
Pumping hydraulic system : full hydraulic control of the hydraulic system , oil pressure transfers signal, making the operation become more simple and reliable, improving swing cylinder commutation speed and reducing the impact of change , meanwhile the speed of large cylinder change is instantly accelerated, the move can full the concrete cylinder, making the process of material continuity and evenly.
The boom and pumping hydraulic system: the arm uses the load-sensitive proportional control system, so as to control the speed of the boom freely and achieve excellent operating performance; it can achieve infinitely variable remote control but also achieve an emergency manual operation in case of emergency; legs and the oil boom switch directly to avoid the misuse and ensure the working security.
The boom: By the finite element analysis, dynamic analysis and experiment and on the basis of accurate data, materials adopt the high strength low alloy steel plate, and all materials and welds passed by 100% non-destructive testing so as to ensure the rational boom structure and high reliability.
Note: ⑴Preferring to choose the matching tops diesel engine: Yuchai, Cummins, Revo.
型号Model | KNL5202THB 35-5RZ |
项目 | 单位 | 值 |
泵送系统Pumping system | 最大理论输送量(高压/低压)Max. Theor. output(high/low pressure) | m3/h | 66/111 |
混凝土最大出口压力(高压/低压) Max. Theor. concrete output Pressure(high/low pressure) | MPa | 10/6 |
额定工作压力 Rated working pressure | MPa | 32 |
泵送频率(高压/低压) Pumping frequency(high/low pressure) | min-1 | 19/32 |
料斗容积 Hopper capacity | L | 600 |
上料高度 Filling height | mm | 1200 |
液压系统型式 Hydraulic system type | | 开式 Open loop |
分配阀形式Distribution valve | | S管阀 S valve |
油缸缸径×行程 Oil cylinder dia.×stroke | mm | φ125×1400 |
混凝土缸径×行程Concrete cylinder dia.×stroke | mm | φ230×1400 |
液压油冷却Hydraulic oil cooling | | 风冷Air cooling |
推荐塌落度 Recommended concrete slump | cm | 12~23 |
最大骨料尺寸 Max. aggregate dimension | mm | 40 |
臂架Placing boom | 结构形式 Structure type | | 35-5RZ |
最大布料高度 Placing depth | m | 35 |
最大布料半径 Horizontal distance | m | 31 |
最大布料深度 Placing depth | m | 26 |
回转角度Slewing angle | | ±270° |
输送管直径 Pipe diameter | mm | 125 |
末端软管长度End hose length | mm | 3000 |
臂架最小打开高度Min. height of opening placing boom | mm | 9000 |
支腿跨距(前×后×纵向)Outriggers span (front×rear×side) | mm | 6140×7606×8446 |
底盘及整车Chassis and the whole machine | 底盘型号Chassis model | | ZZ5207M521GE1 |
轴距 Wheelbase | mm | 5200 |
发动机型号Engine type | | MC07.28-50 |
发动机额定功率 Engine power | kW | 206kw |
燃油箱容积Oil tank cubage | L | 400 |
尾气排放标准Tail gas exhaust standard | | 国V |
整车外形尺寸(长×宽×高) Overall dimensions | mm | 9900x2496x3700 |
其它Others | 润滑方式Lubrication mode | | 手动液压两用同步润滑泵 Manual hydraulic dual - use |
液压油箱容积 Oil tank volume | L | 500 |
控制方式Control mode | | 手动+遥控Manual+remote control |
压力水箱最大压力 Maximum water pressure | MPa | 0.8 |
水箱容量 Water tank volume | L | 400 |
混凝土管清洗方式Pipe cleaning mode | | 水洗/干洗Water cleaning/dry cleaning |
Model | KNL5202THB 37-5RZ |
Item | Unit | Value |
Pumping system | Max. Theor. Output(high/low pressure) | m3/h | 66/111 |
Max. Theor. Concrete Output Pressure(high/low pressure) | MPa | 10/6 |
Rated Working Pressure | MPa | 32 |
Pumping Frequency(high/low pressure) | min-1 | 19/32 |
Hopper Capacity | L | 600 |
Filling Height | mm | 1400 |
Hydraulic System Type | | Open Loop |
Distribution Valve | | S-valve |
Oil Cylinder Dia.×Stroke | mm | φ125×1400 |
Concrete Cylinder Dia.×Stroke | mm | φ230×1400 |
Hydraulic Oil Cooling | | Air cooling |
Recommended Concrete Slump | cm | 12~23 |
Max. Aggregate Dimension | mm | 40 |
Placing boom | Structure Type | | 37-5RZ |
Max. Placing Depth | m | 36.1 |
Horizontal Placing Radius | m | 32.6 |
Placing Depth | m | 25.5 |
Slewing Angle | | 540° |
Pipe Diameter | mm | 125 |
End Hose Length | mm | 3000 |
Min. Height of Opening Placing Boom | mm | 9000 |
Outriggers Span (Front×Rear×Side) | mm | 6140×7606×8446 |
Chassis and the whole machine | Chassis Model | | ZZ5207M521GE1 |
Wheelbase | mm | 5200 |
Engine Type | | MC07.28-50 |
Engine Power | kW | 206kw |
Oil Tank Cubage | L | 400 |
Tail Gas Exhaust Standard | | The Five in China |
Overall Dimensions | mm | 9900x2496x3700 |
Others | Lubrication Mode | | Mannual Operation and Hydraulic |
Oil Tank Volume | L | 500 |
Control Mode | | ManuaL and Remote Control |
Maximum Water Pressure | MPa | 0.8 |
Water Tank Volume | L | 400 |
Concrete Pipe Cleaning Mode | | Water Cleaning / Dry Cleaning |